Specifications

RIGOL Chapter 2 Command System
2-206 M300 Programming Guide
SYSTem:COMMunicate:LAN:MANUip
Syntax SYSTem:COMMunicate:LAN:MANUip <mode>
SYSTem:COMMunicate:LAN:MANUip?
Description
Enable or disable the manual IP configuration mode.
Parameters
Name
Type
Range
Default
<mode>
Bool
ON|OFF|0|1
ON
Explanation  In manual IP configuration mode, users define the network parameters (such as the IP
address).
 When all the three configuration modes are set to “On”, the priority order of parameter
configuration is “DHCP”, “AutoIP” and “ManualIP”.
 This setting takes effect after the
SYSTem:COMMunicate:LAN:UPDate command
(update the setting) is sent.
 The three IP configuration modes cannot all be set to “Off” at the same time.
 The manual IP configuration mode is stored in the non-volatile memory (refer to
Appendix C: Non-volatile Memory) and does not change when the power has been off,
after a Factory Reset (send the
*RST command) or after an Instrument Preset (send
the SYSTem:PRESet command).
Return
Format
The query returns 1 (ON) or 0 (OFF).
Example
SYST:COMM:LAN:MANU ON
SYST:COMM:LAN:MANU?
The query returns 1.
Related
commands
SYSTem:COMMunicate:LAN:DNS
SYSTem:COMMunicate:LAN:GATEway
SYSTem:COMMunicate:LAN:IPADdress
SYSTem:COMMunicate:LAN:SMASk