Specifications

RIGOL Chapter 2 Command System
2-200 M300 Programming Guide
SYSTem:COMMunicate:GPIB:ADDRess
Syntax SYSTem:COMMunicate:GPIB:ADDRess <0-30>
SYSTem:COMMunicate:GPIB:ADDRess?
Description
Set or query the GPIB address.
Parameters
Name
Type
Range
Default
<0-30>
Integer
0 to 30.
None
Explanation  Before using the GPIB interface, connect the instrument and PC using a GPIB cable
and set the GPIB address.
 The GPIB address is stored in the non-volatile memory (refer to
Appendix C:
Non-volatile Memory) and does not change when the power has been off, after a
Factory Reset (send the
*RST command) or after an Instrument Preset (send the
SYSTem:PRESet command).
Return
Format
The query returns an integer, for example, 7.
Example
SYST:COMM:GPIB:ADDR 9
SYST:COMM:GPIB:ADDR?
Typical Response: 9
Related
command
SYSTem Command Subsystem