Specifications

RIGOL Chapter 2 Command System
2-186 M300 Programming Guide
SOURce:DIGital:DATA[:BYTE]
SOURce:DIGital:DATA:DWORd
SOURce:DIGital:DATA:WORD
Syntax SOURce:DIGital:DATA[:BYTE] <data>,(@<ch_list>)
SOURce:DIGital:DATA[:BYTE]? (@<ch_list>)
SOURce:DIGital:DATA:DWORd <data>,(@<ch_list>)
SOURce:DIGital:DATA:DWORd? (@<ch_list>)
SOURce:DIGital:DATA:WORD <data>,(@<ch_list>)
SOURce:DIGital:DATA:WORD? (@<ch_list>)
Description Set the specified DIO channels to output the specified values in 8-bit (BYTE), 16-bit
(WORD) or 32-bit (DWORD).
Parameters
Name
Type
Range
Default
<data> Integer
8-bit: 0 to 255
16-bit: 0 to 65535
32-bit: 0 to 42,9496,7295
None
<ch_list>
Channel
List
One or more channels (only for channel 01 to
channel 04 of the multifunction module), the rules
are as follows:
(@101): channel 01 on the module in Slot1;
(@101:103): channel 01 through 03 on the module
in Slot1;
(@101:103,301): channel 01 through 03 on the
module in Slot1 and channel 01 on the module in
Slot3.
None
Explanation  Only DIO channels that have not been added into the scan list can be used as the
digital output terminal (DOUT).
 <data> can be a decimal number (216), a binary number (#b11011000) or a
hexadecimal number (#hD8).
 The SOURce:DIGital:DATA[:BYTE] <data>,(@<ch_list>) command is applicable to
S01 to S04.
The SOURce:DIGital:DATA:WORD <data>,(@<ch_list>) command is only applicable
to S01 and S03. At this point, S01 (LSB) and S02 (MSB) as well as S03 (LSB) and S04
(MSB) are configured as two 16-bit digital output terminals.
The SOURce:DIGital:DATA:DWORd <data>,(@<ch_list>) command is only applicable
to S01. At this point, S01 (LSB), S02, S03 and S04 (MSB) are configured as a 32-bit
digital output terminal.
If (@<ch_list>) does not match the above conditions, an error will be generated.
Return
Format
The query returns the singed decimal numbers. Multiple return values are separated by
commas.
Example
SOUR:DIG:DATA:BYTE 219,(@101:104)
SOUR:DIG:DATA:WORD #b0101010110101010,(@101,103)
SOUR:DIG:DATA:DWORD #h55aa,(@101)
SOUR:DIG:DATA:DWORD? (@101)
The query returns +21930.
Related
command
SOURce Command Subsystem