Specifications

RIGOL Chapter 2 Command System
2-2 M300 Programming Guide
ABORt
Syntax
ABORt
Description
Abort the current measurement and stop the scan.
Explanation  The instrument stops the current scan when receiving this command and the scan
cannot be resumed. All the previous readings will be cleared when you initiate a new
scan.
 The
*RST command will abort the current measurement, clear the scan list, and set
all the measurement parameters to their factory settings. The
SYSTem:PRESet
command can also abort the current measurement but it will not clear the scan list.
Example
ABOR
Related
commands
*RST
SYSTem:PRESet