Specifications

Chapter 2 Command System RIGOL
M300 Programming Guide 2-169
[SENSe:]TOTalize:CLEar:IMMediate
Syntax
[SENSe:]TOTalize:CLEar:IMMediate [(@<ch_list>)]
Description
Clear the counts of the specified totalizer channels immediately.
Parameters
Name
Type
Range
Default
<ch_list>
Channel
List
One or more channels (only for the TOT
channels), the rules are as follows:
(@105): channel 05 on the module in Slot1;
(@105:108): channel 05 through 08 on the
module in Slot1;
(@105:108,305): channel 05 through 08 on
the module in Slot1 and channel 05 on the
module in Slot3.
If the parameter
is omitted, this
command will be
applied to the
whole scan list.
Explanation  The totalizer channels are numbered as "S05" to "S08"; wherein, S is the number of
the slot.
 The
*RST command will clear the count on the totalizer channels. An Instrument
Preset (send the
SYSTem:PRESet command) or Card Reset (send the SYSTem:CPON
command) does not affect the current count of the TOT channel.
Example TOT:CLE:IMM (@105)
TOT:DATA? (@105)
Tthe query returns +0.00000000E+00.
Related
command
[SENSe:]TOTalize:DATA?