Specifications

Chapter 2 Command System RIGOL
M300 Programming Guide 2-167
[SENSe:]TEMPerature:TRANsducer:THERmistor:TYPE
Syntax [SENSe:]TEMPerature:TRANsducer:THERmistor:TYPE <type>[,(@<ch_list>)]
[SENSe:]TEMPerature:TRANsducer:THERmistor:TYPE? [(@<ch_list>)]
Description Set or query the thermistor type of the thermistor temperature measurements on the
specified channels.
Parameters
Name
Type
Range
Default
<type>
Discrete
{2252|3000|5000|10000|30000}
5000
<ch_list>
Channel
List
One or more channels (only for the
multiplexer channels), the rules are as
follows:
(@101): channel 01 on the module in Slot1;
(@101:103): channel 01 through 03 on the
module in Slot1;
(@101:103,301): channel 01 through 03 on
the module in Slot1 and channel 01 on the
module in Slot3.
If the parameter
is omitted, this
command will be
applied to the
whole scan list.
Explanation  The instrument sets the thermistor type to "5000" after a Factory Reset (send the
*RST command). An Instrument Preset (send the SYSTem:PRESet command) or Card
Reset (send the
SYSTem:CPON command) does not affect the current thermistor type.
Return
Format
The query returns the thermistor type for each channel specified. Multiple return values are
separated by commas.
Example TEMP:TRAN:THER:TYPE 2252,(@101:103)
TEMP:TRAN:THER:TYPE? (@101:103,205)
The query returns +2252,+2252,+2252,+5000.
Related
command
SENSe Command Subsystem