Specifications

RIGOL Chapter 1 Programming Overview
1-4 M300 Programming Guide
Remote Control Methods
1. Send SCPI Commands via the PC Software
You can control the M300 Data Acquisition/Switch System remotely by sending SCPI commands via the
PC software (Ultra Sigma) provided by RIGOL
. Besides, you can also control the instrument using the
“Measurement & Automation Explorer” of NI (National Instruments Corporation) or the “Agilent IO
Libraries Suite” of Agilent (Agilent Technologies, Inc.).
2. User-defined Programming
You can program and control the instrument using the SCPI (Standard Commands for Programmable
Instruments) commands listed in chapter 2
Command System in various development environments
(such as Visual Studio and LabVIEW). For details, refer to the introductions in chapter 4
Programming
Demos.