Specifications

Chapter 2 Command System RIGOL
M300 Programming Guide 2-87
MEMory:STATe:DELete
Syntax
MEMory:STATe:DELete <location>
Description
Delete the contents of the measurement configuration file in the specified storage location.
Parameters
Name
Type
Range
Default
<location>
Discrete
{0|1|2|3|4|5}
None
Explanation  If you have deleted the contents of the measurement configuration file in the specified
storage location and then send the
*RCL command to racall the contants of this file to
overwrite the current measurement configuration, an error will be generated.
 This command deletes the contents of the measurement configuration file in the
specified storage location, but does not delete the file.
 This command can only delete the file created by the
*SAV command. It can not
delete the file created by the
MEMory:SAVE:CONFig command.
 Sending this command will generate an error if the specified file dose not exist
(Sending the
SYSTem:SECurity[:IMMediate] command will delete all the files in the
memory). You can send the
*SAV command to create the measurement configuration
file in the specified storage location.
 A Factory Reset (the
*RST command) does not affect the measurement configuration
files in the specified storage location. Sending the
SYSTem:SECurity[:IMMediate]
command will delete all the measurement configuration files in the memory.
Example
MEM:STAT:DEL 0
Related
Commands
*SAV
*RCL
MEMory:STATe:DELete
MEMory:STATe:NAME
MEMory:STATe:VALid?