Specifications

RIGOL
36 M300 Selection Guide
To Select Optional Accessories
1. If you want to make measurements
Step 1: Select the DMM module or use external DMM
 The DMM module (MC3065) is recommended
With MC3065, you can perform DCV, ACV, DCI, ACI, 2WR (2-wire resistance), 4WR (4-wire
resistance), FREQ, PERIOD, TEMP (temperature) and SENSOR (any sensor) measurements.
 Alternate plan
If you already has a digital multimeter (such as RIGOL DM3068), you can order an analog bus
external port which together with the digital multimeter and the mixed-interface separator line
(standard accessory) can be used in place of MC3065.
Step 2: Select the desired modules according to your measurement needs
Get a basic understanding of the specifications and supported measurement functions of each
module by referring to the
M300 Data Sheet and M300 User's Guide and order the desired modules
according to your measurement needs.
Step 3: Select the terminal blocks corresponding to the modules selected
Module
Terminal Block
MC3120
M3TB20
MC3132
M3TB32
MC3164
M3TB64
MC3324
M3TB24
2. If you do not need to make measurements
 If only single input/output switch is required, please select MC3416 and M3TB16.
 If multiple input/output switches are required, please select MC3648 and M3TB48.
 If the digital input/output (DIO), totalizer (TOT) or analog voltage output (DAC) function is
required, please select MC3534 and M3TB34.
3. Select other optional accessories
 If the RS232 interface of M300 is required for communication, please order the RS232 serial
cable and use it with the mixed-interface separator line (standard accessory).
 If you want to change the direction of the GPIB interface, please order the GPIB invert port.
 If you want to install M300 into a standard 19-inch machine cabinet, please order the rack
mount kit for a single instrument or the rack mount kit for two instruments according to your
need.
 If you want to use the advanced functions of Ultra Acquire (all history data preview,
re-calculation and report generator), please order Ultra Acquire. If you only want to use the
basic functions of Ultra Acquire, you can download the installation file from
http://www.rigol.com/prodserv/M300/software/ (you do not need to order the software).