Specifications

RIGOL
26 M300 Selection Guide
Multifunction Module and Terminal Block
The multifunction module (MC3534) provides 3 kinds of functions with 4 channels for each function. This
module can be used to check status or control external devices (such as solenoids, power relays and
microwave switches). You can also read the digital inputs and the totalizer count during a scan.
 DIO: four 8-bit digital input/output (DIO) ports
 TOT: 4 totalizer (TOT) input terminals (the first two channels are 10 MHz TOT and the other two
channels are 100 kHz TOT) with 1 Vpp sensitivity
 DAC: 4 analog output terminals and can output ±12 V calibrated voltage
MC3534 is as shown in the figure below.
Figure 26 MC3534
M3TB34 is an external terminal block applicable to MC3534. Its appearance and detailed layout are as
shown in the figure below. The connecting terminals correspond to the 12 channels of MC3534
respectively. The connecting terminals can be recognized via the labels (PORT1 to PORT4, TOT1 to TOT4
and DAC1 to DAC4) below or above them.
Figure 27 M3TB34