Specifications

RIGOL
16 M300 Selection Guide
3. MC3164 and M3TB64
MC3164 is a 64-channel single-ended multiplexer. All the 64 channels can switch the HI input only.
MC3164 is divided into two banks (A and B) with 32 single-ended channels for each bank. All the
channels added into the scan list are break-before-make. In any case, you cannot close multiple
channels on this module.
MC3164 can be connected with MC3065 (the DMM module, if MC3065 is currently inserted). MC3164
cannot be used for 4-wire resistance measurement.
MC3164 is as shown in the figure below.
Figure 14 MC3164
M3TB64 is an external terminal block applicable to MC3164. Its appearance and detailed layout are
as shown in the figure below. The 64 connecting terminals correspond to the 64 channels of MC3164
respectively. The connecting terminals can be recognized via the labels (01 to 64) below or above
them. This terminal block does not support 4-wire connection.
Figure 15 M3TB64