User manual

Chapter 1 Quick Start RIGOL

User’s Guide for DSA800 Series

1-25

Figure 1-13 Filename Input Interface

Tip

If USB storage device is currently connected, the instrument will also enter the

filename input interface when is pressed.

2. Input English Filename

1) Press to switch to English input mode. You can also press to

switch between upper and lower cases. At this point, the corresponding

label is displayed at the lower right corner of the filename input interface.

2) Press the key of the desired letter. At this point, the letters available are

displayed in the letter selecting area. Press this key repeatedly until

the desired letter is selected (the background color of the letter becomes

brown). Then press Enter to input the desired letter.

3) Use the above method to input the other letters.

3. Input Chinese Filename

1) Press to switch to Chinese input mode (T9 input method). At this

point, the corresponding label is displayed at the lower right corner of the

filename input interface.

2) Press the key of the first letter of the pinyin of the Chinese character. At

this point, the pinyins available are displayed in the pinyin selecting

area and the corresponding Chinese characters of the pinyin currently

selected are displayed in the Chinese character selecting area. If the

desired pinyin is displayed, refer to 3). Otherwise, please continue to

Pinyin Selecting Area Chinese Character Selecting Arear

Chinese Characters Entered Chinese Input Mode