User manual

RIGOL Chapter 1 Quick Start
User’s Guide for DSA800 Series
1-18
connection is in process.
: denote the connection succeeds, the print
finishes or the printer is idle.
: displayed alternatively, denote the print is
in process.
: denote the print has been paused.
7
Print process
Show the current print copy and total print copies.
8
USB storage device
status
is displayed when USB storage device is
installed.
9
Operation status
Display “Local” (in local mode) or “Rmt” (in remote
mode).
10
Menu title
Function of the current menu.
11
Menu items
Menu items of the current function.
12
Reference level
Reference level.
13
Active function area
Current parameter and its value.
14
Attenuator settings
Attenuator settings.
15
Display line
Reading the reference and the threshold condition
for peak value display.
16
Trigger level
Set the trigger level in video trigger.
17
Average times
Average times of trace.
18
Cursor X
Current X value of the cursor. Note that X indicates
different physical quantities in different functions.
19
Cursor Y
Current Y value of the cursor. Note that Y indicates
different physical quantities in different functions.
20
Invalid data
Current measured data is invalid as a full sweep
dosen’t complete after the system parameters
have been modified.
21
Menu page number
Show the total number of pages and current page
number.
22
Sweep position
Current sweep position.
23
Sweep time
Sweep time.
24
Span or stop
frequency
The frequency range of the current sweep channel
can be expressed by a combination of center
frequency and span or a combination of start
frequency and stop frequency.
25
Manual setting
The corresponding parameter is in manual setting