User manual

RIGOL Chapter 1 Quick Start
User’s Guide for DSA800 Series
1-12
3. GEN OUTPUT 50 Ω
The output of the tracking generator can be connected to a receiver through a
cable with an N male connector. The tracking generator is an option and you
can order it when required.
CAUTION
To avoid damage to the tracking generator, the reverse power or voltage
can not exceed 1 W or 50 V DC.
4. RF INPUT 50Ω
The input terminal of the signal under measurement. [RF INPUT 50Ω] can
be connected to the device under measurement via a cable with an N male
connector.
CAUTION
To avoid damage to the instrument, for the signal input from the RF
input terminal, the DC voltage component and the maximum continuous
power of the AC (RF) signal component can not exceed 50 V and 20
dBm respectively.