User manual

RIGOL Chapter 1 Quick Start

User’s Guide for DSA800 Series

1-8

Front Panel Function Keys

Figure 1-6 Function Key Area

Table 1-2 Function keys description

Key

Description

FREQ

Set the center, start and stop frequency; enable the signal

tracking function.

SPAN

Set the frequency span of the sweep.

AMPT

Set the reference level, RF attenuator, scale and the unit of

Y-axis, etc.

Set the reference level offset, maximum mixing level and

input impedence.

Execute auto scale and auto range as well as turn on the RF

preamplifier.

BW/Det

Set the resolution bandwidth (RBW) and video bandwidth

(VBW).

Set the detector and filter types.

Sweep/Trig

Set the sweep and trigger parameters.

Trace/P/F

Set the parameters related to trace.

Configure the Pass/Fail test.

Set the tracking generator

Meas

Select and control the measurement function

Meas Setup

Set the parameters for the selected measurement function