User manual

RIGOL Chapter 4 Troubleshooting&Message
User’s Guide for DSA800 Series
4-18
357
Invalid function in non-zero span.
Neither Video trigger nor the 1/ΔTime in marker readout is effective in
non-zero span.
358
Invalid mark readout.
When the marker is in Delta Pair mode, the 1/Δ Time in marker readout is
of no effect; and when the marker is in normal mode, MkrΔ ->CF and Mkr
Δ ->Span are of no effect.
359
Invalid function when trace is not enabled.
A marker could not be assigned to a trace when the correct trace function
is not enabled.
360
User preset failed.
The user preset has failed because the edition of the saved status data is
incorrect or the status data has been damaged. In this situation, the
system will execute Factory settings by default.
400
Input signal power out of range.
Indicate that the input signal power is out of range. If this state continues
for a long time, some damage may occur to the device. Please reduce the
input power.
401
1st LO unlock.
The first LO is unlocked. Please report the error to your RIGOL sales or
technical support.
402
2nd LO unlock.
The second LO is unlocked. Please report the error to your RIGOL sales
or technical support.
403
Track LO unlock.
Track LO is unlocked. Please report the error to your RIGOL sales or
technical support.
412
Overrange occurs in DA by a volume adjustment in FM.
413
Intermediate frequency signal out of range.
420
Option not installed.
The desired operation cannot be performed because the option required
is not installed. For example, press TG when no tracking generator is
installed.
460
No peak found.
No signal peak that meets the criteria was found under Peak Search.
461
No fundamental wave found.
Indicate that no fundamental wave greater than 50dBm is found.