User manual

Chapter 4 Troubleshooting&Message RIGOL
User’s Guide for DSA800 Series
4-17
323
U-Disk failed to install.
The USB storage device can not be correctly installed and please examine
it for possible damage. For any question, please contact your distributor
or RIGOL technical support.
324
File name existed.
The file name received already exists and please re-input.
325
Input empty.
The input is empty and please input a legal string before saving.
326
Fail to save file.
327
Other language except English not supported.
Any other languages are disabled except English.
328
File operation failed.
329
No space to save file.
The document or file can not be created or saved owing to limited space.
331
Invalid option serial number.
The length of option serial number must be less than 20 characters.
332
Invalid File Type to load.
333
Invalid installation, please insert U disk again.
340
DHCP renew failed.
Fail to configure IP address with DHCP server. Please try manual IP.
341
IP conflict.
The IP address received is already in use. Please try another IP address.
342
Invalid IP.
The IP address received is invalid.
350
Can’t auto-couple sweep time in zero span.
Sweep time can not be coupled automatically in zero span. Please set it
manually.
351
Zero span unavailable at power measurement mode.
354
Pre-amplifier disable.
Please adjust the settings of reference level, attenuator as well as
maximum mixing level.
355
Scale/div invalid in linear scale mode.
356
Invalid function in zero span.
In zero span, the following operations cannot be executed: Signal Track
On, Span Zoom In, Span Zoom Out, Peak->CF, Mkr->CF, Mkr->Step,
Mkr->Start, Mkr->Stop, Mkr Delta->CF, Mkr Delta->Span, setting the
Mark readout as FREQ or PERIOD, TG power sweep.