User manual

RIGOL Chapter 4 Troubleshooting&Message
User’s Guide for DSA800 Series
4-16
-350
Queue overflow.
Error occurs when the code enters into the queue. This message
indicates that there is no room in the queue and an error occurred but
was not recorded.
-360
Communication error.
-365
Time out error.
Communicating with USB-GPIB interface converter times out. Please
restart the converter.
300
Print paper error.
Fail to print. Please check whether the print paper is available and in the
correct position.
301
Print ink error.
Fail to print. Please check the quantity of ink or confirm whether the ink
box is installed correctly.
302
Print hardware error.
Fail to print. Indicate that a printer hardware error has occurred. Please
check it.
303
Print file type error.
Fail to print owing to wrong print file type.
304
Unknown print error.
310
Updating error with wrong image file.
An error occurred when updating firmware because the format of the
image file is incorrect or the file has already been damaged.
311
Updating error with wrong revision.
An error occurred when updating firmware because of a revision
incompatibility.
312
Updating error with failing to write flash.
An error occurred when updating firmware owing to a failure to write to
the flash.
320
Invalid file path.
The file path received may not exist or an illegal path format was used.
321
Invalid input string.
An illegal string has been received.
322
File name too long.
The file name is too long. The length should not exceed 48 characters.