User manual

Chapter 4 Troubleshooting&Message RIGOL
User’s Guide for DSA800 Series
4-7
might not be correctly recognized and the instrument might not
work normally.
18
The last spell char is allowed to input.
19
Please select the valid file type.
20
U Disk is not connected.
30
LAN connected.
31
32
LAN disconnected.
Network settings will be reset, press yes to continue?
41
Welcome to User Mode.
50
Please Confirm, and press twice.
51
The display was locked, please press Esc to unlock.
52
Display unlocked.
54
Please select the valid file.
55
It is not allowed to delete folder.
56
Fail to load file.
57
Local Disk is being Formatted, please wait for a moment.
58
Formatting is finished.
60
Software version is not matched, file loading is failed.
61
Invalid source.
62
Select where to load, antenna, cable, user or others.
63
Option is activated.
64
Option is deleted.
65
The edit frequency has been existed.
80
Limit lines are cleaned because of change of X Axis type.
81
Copy complete.
82
Do you want to replace the exist file?
83
Please select the copy.
84
Fail to copy, as the destination is the same as the source.
85
Updating the reference trace…
86 Enter production line mode.
87 Exit production line mode.
88 Please press key ESC to exit remote control mode.