User manual

RIGOL Chapter 4 Troubleshooting&Message
User’s Guide for DSA800 Series
4-6
Information Message
Number
Error Description
1
PictBridge printer connected.
PictBridge printer has already been connected successfully and is
waiting for initialization.
2
PictBridge printer installed successfully.
PictBridge printer has already been installed successfully and is
ready for printing.
3
PictBridge printer disconnected.
4
Printing task finished.
5
Printing task paused.
Printing task has been paused due to an error, please solve the
problem and select RESUME. For the cause of the error please
refer to the message list.
6
Printing task stopped.
An irretrievable error occurred during printing, please select
“Cancel” to stop the printing.
7
Printing task canceled.
8
Printing task resumed.
10
U Disk connected.
USB storage device has already been connected and is waiting for
initialization.
11
U Disk installed successfully.
12
U Disk removed.
13
Start updating firmware.
The firmware is updating, please wait and keep the USB storage
device connected. For any problem, please contact RIGOL
technical support.
14
Updating firmware completed.
Firmware update is finished and the new firmware program will be
executed automatically when you restart the device.
15
Saving file completed.
16
To Recover file existed.
17
Load data with old revision.
Load data from the old edition to the current system. The data