User manual

RIGOL Chapter 3 Remote Control
User’s Guide for DSA800 Series
3-12
displayed on the right side of the panel.
Figure 3-8 GPIB Setting
If resources cannot be found automatically:
 Select the GPIB card address of the PC and the GPIB address of the
analyzer from the “GPIB::” and “INSTR::” dropdown boxes separately.
 Click “Test” to see if the GPIB communication works normally; if not,
please follow the prompt messages step by step.
5) View the resource
Click and return back to the main interface of Ultra Sigma.
The resources that have been found successfully at present are shown
under the “RIGOL Online Resource” catalog.
Figure 3-9 View the GPIB Resource