User manual

Chapter 3 Remote Control RIGOL
User’s Guide for DSA800 Series
3-7
PC and turn both on (the analyzer will be configured as USB interface
automatically), the PC will display the hardware update wizard dialog box.
Please install the “USB Test and Measurement Device” driver following
the directions of the wizard. For the procedures, refer to “User-defined
Programming”.
3) Search device resource
Start-up Ultra Sigma, and the software starts searching the analyzer
resources currently connected to the PC, or click to search
manually. The status bar of Ultra Sigma at present is as shown in the
figure below.
Figure 3-1 Search USB Resources
4) View the resourse
The resources that have been found successfully are shown under the
“RIGOL Online Resource” catalog and the instrument model and USB
interface information are also displayed as shown in the figure below.
Figure 3-2 View the Resource