User manual

User’s Guide for DSA800 Series
Chapter 2 Front Panel Operation RIGOL
2-113
2. Key Test
Enter the keyboard test interface. Press the function keys at the front panel
one by one and observe whether the corresponding key lights. If not, an error
may have occurred in that key. Note if the key at the front panel is transparent,
its backlight will also light when you press it. To exit the test, press Esc three
times.
Time/Date
The system time is displayed in “hh:mm:ss YYYY-MM-DD” format in the DSA800
user interface. The output file can include the time information when printing or
storing interface image according to your setting.
1. Time/Date
Enable or disable the Time/Date display.
2. Set Time
Set the display time of the analyzer. The time format should be hhmmss, for
example, 231211 (denotes 23:12:11).
3. Set Date
Set the display date of the analyzer. The date format should be YYYYMMDD,
for example, 20111001 (denotes October 1st, 2011).
License
DSA800 provides many kinds of options to fulfill various measurement
requirements. To order the corresponding option, please contact RIGOL.
Press License to enter the option management interface to view the option status
and the license key of the installed option as well as to install option.
1. Option Info
Display the status of options.