User manual

User’s Guide for DSA800 Series
Chapter 2 Front Panel Operation RIGOL
2-107
analyzer obtains an IP address (from 169.254.0.1 to 169.254.255.254)
and the subnet mask 255.255.0.0 automatically.
 Manual-IP:
One of the setting methods of IP address. When manual IP is enabled,
users can define a desired IP address for the analyzer.
 IP:
Set the IP address, subnet mask and gateway manually.
a) The format of IP address is nnn.nnn.nnn.nnn. Wherein, the range of
the first nnn is from 0 to 223 (except 127) and the ranges of the
other three nnn are from 0 to 255. It is recommended that you ask
your network administor for an available IP address. Press IP
Address and use the numeric keys to input the desired IP address.
b) The format of subnet mask is nnn.nnn.nnn.nnn, wherein, the range
of nnn is from 0 to 255. It is recommended that you ask your
network administor for an available subnet mask. Press Mask and
use the numeric keys to input the desired subnet mask.
c) The format of gateway is nnn.nnn.nnn.nnn. Wherein, the range of
the first nnn is from 0 to 223 (except 127) and the ranges of the
other three nnn are from 0 to 255. It is recommended that you ask
your network administor for an available gateway. Press Gate and
use the numeric keys to input the desired gateway.
Note: the analyzer always tries to get an IP address in the order of DHCP,
Auto-IP and Manual-IP. These three methods cannot be disabled at the
same time.
 Domain Server (DNS):
Set the IP address of the DNS server. The format of domain server
address is nnn.nnn.nnn.nnn. Wherein, the range of the first nnn is from 0
to 223 (except 127) and the ranges of the other three nnn are from 0 to
255. It is recommended that you ask your network administor for an
available address. Press DNS and use the numeric keys to input the
desired address.
3. USB
DSA800 provides a USB Device interface at the rear panel.