User manual

RIGOL Chapter 2 Front Panel Operation
User’s Guide for DSA800 Series
2-52
T-Power
Measurement Interface:
Figure 2-14 T-Power Measurement Interface
Measurement Result: T-power, namely the power of the signal from the start
line to the stop line.
Measurement Parameters: average number, average mode, TP type, start line
and stop line.
1. Avg Num
Specify the number of measurement averages used when calculating the
measurement result. The default is “Off”. You can use the numeric keys, knob
or direction keys to modify this parameter.
Table 2-27 Average Number of T-Power Measurement
Parameter
Description
Default
10
Range
1 to 1000
Measurement Result Measurement Parameters
Measurement Control
Start Line Stop Line