User manual

User’s Guide for DSA800 Series
Chapter 2 Front Panel Operation RIGOL
2-7
center frequency to hold the signal at the center of the screen.
 If no marker is currently active, when Signal Track is enabled, the instrument
will activate Marker 1, execute a peak search automatically and set the
frequency of the current peak as the center frequency to hold the signal at the
center of the screen.
 In continuous sweep, the system tracks the signal continuously; in single
sweep, only one track is done; in Zero Span, Signal Track is invalid.
Peak -> CF
Execute a peak search and use the frequency of current peak as the center
frequency (CF) of the analyzer. The function is invalid in Zero Span mode.
Figure 2-2 Before Peak->CF
Peak
Center Freq