User manual

User’s Guide for DSA800 Series
Chapter 2 Front Panel Operation RIGOL
2-119
File Type
Press Storage  File Type to select the desired file type. File types available
include All, Setup, State, Trace, Corrections, Measure, Marker Table, Peak Table
and Limit. The default is All. For the details about each type of file, see the table
below.
Note: Measure, Marker Table and Peak Table in File Type are only available when
the corresponding functions are enabled.
Table 2-65 File type
*
File Type
Format
Extension
Setup
BIN
.set
State
BIN
.sta
Trace
BIN
.trc
CSV
.csv
Amplitude
correction
BIN
.cbl
CSV
.csv
Measurement data
CSV
.csv
Marker table
BIN
.mkr
CSV
.csv
Peak table
CSV
.csv
Limit
BIN
.lim
*
Note: Mobile Disk (E:) supports all types of files; User Preset (C:) only supports the “State” files
and Local (D:) supports all types of files except “Measure”, “Marker Table” and “Peak Table”.
Format
Press Storage  Format to set the storage format of the file to BIN (default) or
CSV.
 BIN: binary file format.
 CSV: character file that can be read by editors such as Excel and supports all
data processings under Excel such as drawing histogram.
Note: this menu is available only when external memory is connected.