User manual

User’s Guide for DSA800 Series
Chapter 2 Front Panel Operation RIGOL
2-97
Preset
Recall the preset setting and restore the analyzer to a specified status.
Key Points:
 Press System  Reset  Preset Type to select “Factory” or one of “User1”
to “User6”.
 Press Preset to load the factory settings listed in the following table (except
items marked with “**”) or User-defined settings.
Table 2-59 Factory Settings
Parameter
Default
Frequency
Center Freq
750 MHz
Start Freq
0 Hz
Stop Freq
1.5 GHz
CF Step
Auto, 150 MHz
Signal Track
Off
Span
Span
1.5 GHz
Amplitude
Ref Level
0 dBm
Ref Offset
0 dB
Scale/Div
10 dB
Input Atten
Auto, 10 dB
Scale Type
Log
Units
dBm
RF Preamp
Off
Input
50 Ω
MaxMixL
-10 dBm
BW/Det
BW
RBW
Auto, 1 MHz
VBW
Auto, 1 MHz
V/R Ratio
1