User Manual

Chapter 1 Quick Start RIGOL

User’s Guide for DSA800 Series

1-25

Figure 1-13 Filename Input Interface

Tip:

If a USB storage device is currently connected, the instrument will also enter

the filename input interface when

is pressed.

2. Input Chinese Filename

1) Press

to switch to Chinese input mode. At this point, the

corresponding label is displayed at the lower right corner of the filename

input interface.

2) Press the key of the first letter of the pinyin of the Chinese character. At

this point, the pinyins available are displayed in the pinyin selecting

area and the corresponding Chinese characters of the pinyin currently

selected are displayed in the Chinese character selecting area. If the

desired pinyin is displayed, refer to 3). Otherwise, please continue to

input the other letters in the pinyin and then refer to 3).

3) Rotate the knob until the background color of the desired pinyin becomes

brown. Then, press Enter to select the pinyin. At this point, the

corresponding Chinese characters are numbered and displayed in the

Chinese character selecting area. Use the numeric keys to select the

desired Chinese character. You can also use the the direction keys to open

the previous or next page in the Chinese character selecting area.

4) Use the same method to input the other Chinese characters.

3. Input English Filename

1) Press

to switch to English input mode. You can also press to

Numbers Entered

Number Input Mode