User Manual

RIGOL Chapter 4 Troubleshooting&Message
User’s Guide for DSA800 Series
4-6
Information Message
Number
Message Description
1
PictBridge printer connected.
PictBridge printer is connected successfully and is waiting for
initialization.
2 PictBridge printer installed successfully.
PictBridge printer has already been installed successfully and is ready
for printing.
3 PictBridge printer disconnected.
4 Printing task finished.
5 Printing task paused.
Printing task is paused due to an error. Please solve the problem and
select “RESUME”. For the cause of the error please refer to the message
list.
6 Printing task stopped.
An irretrievable error occurred during printing. Please select “Cancel” to
stop the printing.
7 Printing task canceled.
8 Printing task resumed.
10 U Disk connected.
A USB storage device is connected and is waiting for initialization.
11 U Disk installed successfully.
12 U Disk removed.
13
Start updating firmware.
The firmware is updating; please wait and keep the USB storage device
connected. For any problem, please contact
RIGOL
technical support.
14 Updating firmware completed.
Firmware update is finished. The new firmware program will be
executed automatically as soon as you restart the device.
15 Saving file completed.
16
Overwrite file existed.
17
Load data with old revision.
Load old version data into the current system. The data might not be
correctly recognized and the instrument might not work normally.
18
The last spell char is allowed to input.