User Manual

RIGOL Chapter 3 Remote Control
User’s Guide for DSA800 Series
3-2
Remote Control Overview
DSA800 supports communication with PC via USB, LAN or GPIB (option) interface
for remote control. The remote control is realized on the basis of SCPI (Standard
Commands for Programmable Instruments) command set. DSA800 supports SCPI
1999.1 version.
When the instrument is in remote mode, the
icon is displayed in the user
interface and the front panel keys (except Esc) are locked. At this point, you can
press Esc to exist the remote mode.