DSA800 Series Spectrum Analyzer ● All-Digital IF Technology ● Frequency Range from 9 kHz up to 7.5 GHz ● Min. -161 dBm Displayed Average Noise Level (Typ.) ● Min. < -98 dBc/Hz @ 10 kHz Offset Phase Noise ● Level Measurement Uncertainty < 0.8 dB ● 10 Hz Minimum Resolution Bandwidth (DSA832/875) ● Up to 7.5 GHz Tracking Generator (DSA8XX-TG) ● Optional Preamplifier (DSA832/875) ● Advanced Measurement Functions (Opt.) ● EMI Filter & Quasi-Peak Detector Kit (Opt.
DSA800 Series Spectrum Analyzer Advanced Measurement Keys Basic Keys USB Port TG Output Marker Keys RF Input Product Dimensions: Width X Height X Depth = 361.6 mm x 178.8 mm x 128 mm Benefits of Rigol's all digital IF design The ability to measure smaller signals: on the basis of this technology, the IF filter enables smaller bandwidth settings, which greatly reduce the displayed average noise level.
Features and Benefits Distinguish the two nearby signals clearly with the 10 Hz RBW (DSA832/875) Compare the spectrums with different color trace Readout the spectrum peak values with the peak table function Measure lower level signal with the preamplifier turn on Phase noise < -98 dBc/Hz @10 kHz offset (DSA832/875) EMI kit (EMI filter & Quasi-peak & Pass/Fail) The GUI to control the RF demo kit (Transmitter) directly VSWR measurement RIGOL 2
RIGOL Spectrum Analyzer Option and Accessory Harmonic Distoration TOI Occupied Bandwidth Channel Power Time Domain Power Emission Bandwidth Carrier to Noise Ratio Adjacent Channel Power Pass/Fail Advanced Measurement Kit （AMK-DSA800） Rack Mount Kit ( RM-DSA800 ) VSWR Bridge ( VB1020/VB1040/VB1080 ) RF Demo Kit ( TX1000 ) RF Demo Kit ( RX1000 ) RF CATV Kit DSA Utility Kit RF Adaptor Kit RF Attenuator Kit RF Cable Kit High Power Attenuator ( ATT03301H ) DSA PC Software ( Ultra Spectrum ) (
Specifications Specifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0 ℃ to 50 ℃ temperature, and is warmed up for 40 minutes. Unless otherwise noted, the specifications in this manual include the measurement uncertainty. Typical (typ.): characteristic performance, which 80 percent of the measurement results will meet at room temperature (approximately 25℃ ).
Residual FM 20℃ to 30℃ , RBW = VBW = 1 kHz DSA815 <50 Hz (nom.) Residual FM DSA832 <20 Hz (nom.) DSA875 DSA832 DSA875 Bandwidths Resolution bandwidth (-3 dB) RBW uncertainty Resolution filter shape factor (60 dB: 3 dB) Video bandwidth (-3 dB) Resolution bandwidth (-6 dB) (EMI-DSA800 option) DSA815 100 Hz to 1 MHz, in 1-3-10 sequence <5% (nom.) 10 Hz to 1 MHz, in 1-3-10 sequence <5 (nom.
Displayed Average Noise Level (DANL) Frequency PA off PA on 9 kHz to 100 kHz 100 kHz to 5 MHz 5 MHz to 3.2 GHz 3.2 GHz to 6 GHz 6 GHz to 7.5 GHz 100 kHz to 1 MHz 1 MHz to 5 MHz 5 MHz to 3.2 GHz 3.2 GHz to 6 GHz 6 GHz to 7.5 GHz DSA832 DSA875 attenuation = 0 dB, RBW = VBW = 10 Hz, sample detector, trace average ≥ 50, tracking generator off, 20℃ to 30℃ , input impendence = 50 Ω <-110 dBm (typ.) <-110 dBm (typ.) <-125 dBm, <-128 dBm (typ.) <-125 dBm, <-128 dBm (typ.) <-130 dBm, <-134 dBm (typ.
Level Display Logarithmic level axis Linear level axis Number of display points Number of traces Trace detectors Trace functions Units of level axis 1 dB to 200 dB 0 to reference level 601 3 + math trace normal, positive-peak, negative-peak, sample, RMS, voltage average quasi-peak (with EMI-DSA800 option) clear write, max hold, min hold, average, view, blank dBm,dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W Frequency Response Frequency response 100 kHz to 1.5 GHz PA off 1.5 GHz to 3.2 GHz 3.2 GHz to 7.
Absolute Amplitude Uncertainty DSA815 DSA875 DSA832 fc = 50 MHz, peak detector, preamplifier off, attenuation = 10 dB, input signal level = -10 dBm, 20 ºC to 30 ºC <0.4 dB <0.3 dB Uncertainty RBW Switching Uncertainty relative to 1 kHz RBW <0.1 dB Uncertainty Reference Level Range Resolution log scale linear scale -100 dBm to +20 dBm, in 1 dB step 0.01 dB 4 digits Preamplifier Gain 100 kHz to 1.5 GHz 1.5 GHz to 3.2 GHz 3.2 GHz to 7.5 GHz DSA815 (standard) 20 dB (nom.
RF Input VSWR VSWR 300 kHz to 1.5 GHz 1.5 GHz to 3.2 GHz 3.2 GHz to 7.5 GHz DSA815 attenuation ≥ 10 dB <1.5 (nom.) DSA832 DSA875 <1.5 (nom.) <1.5 (nom.) <1.8 (nom.
Spurious Responses Spurious response Intermediate frequency System related sidebands Input related spurious DSA815 DSA832 DSA875 input terminated 50 Ω, attenuation = 0 dB, 20ºC to 30ºC <-90 dBm[1], <-88 dBm (typ.) <-100 dBm (typ.) <-60 dBc referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of first LO, referenced to harmonic of first LO <-60 dBc mixer level = -30 dBm <-60 dBc NOTE: [1] Except the internal local oscillator (1820 MHz) and its harmonics.
Trigger Functions Trigger Trigger source External trigger level free run, video, external 5 V TTL level Input /Output Front Panel Connectors impedance RF input connector impedance Tracking generator output connector 50 Ω (nom.) N female 50 Ω (nom.) N female Internal/ External Reference frequency output level Internal reference impedance connector frequency input level External reference impedance connector 10 MHz +3 dBm to +10 dBm, +8 dBm (typ.) 50 Ω (nom.
General Specifications Display Type Resolution Size Colors TFT LCD 800 x 480 pixels 8 inch 64 k Printer Supported Protocol PictBridge Mass Memory Mass memory flash disk (internal), USB storage device (not supplied) Power Supply Input voltage range, AC AC supply frequency Power consumption 100 V to 240 V (nom.) 45 Hz to 440 Hz 35 W (typ.), max.
Ordering Information Model Standard accessories Options Optional accessories Description spectrum analyzer, 9 kHz to 1.5 GHz (with preamplifier) spectrum analyzer, 9 kHz to 3.2 GHz spectrum analyzer, 9 kHz to 7.5 GHz spectrum analyzer, 9 kHz to 1.5 GHz (with preamplifier, with tracking generator, factory installed) spectrum analyzer, 9 kHz to 3.2 GHz (with tracking generator, factory installed) spectrum analyzer, 9 kHz to 7.
