Datasheet

9
RIGOL
Trigger
Trigger source free run, video, external
External trigger level 5 V TTL level
Signal Seamless Capture (SSC)
Measurement bandwidth 1.5 MHz
Front Panel Connectors
RF input
impedance 50 Ω (nom.)
connector N female
Sweep
Input /Output
Trigger
SSC-DSA (Option)
Spurious Response
Spurious response, inherent
DSA705 DSA710
input terminated 50 Ω, attenuation = 0 dB, 20
℃
to 30
℃
<-88dBm (typ.)
Intermediate frequency <-60 dBc
System related sidebands
referenced to local oscillators, referenced to A/D conversion, referenced to
<-60 dBc
Input related spurious
mixer level = -30 dBm
<-60 dBc
Sweep
DSA705 DSA710
Sweep time
span ≥ 100 Hz 10 ms to 500 s 10 ms to 1000 s
zero span 20 µs to 500 s 20 µs to 1000 s
Sweep time
uncertainty
span ≥ 100 Hz 5% (nom.)
zero span (sweep time setting
value > 1 ms)
5% (nom.)
Sweep mode continuous, single
Internal/ External Reference
Internal reference
frequency 10 MHz
output level +3 dBm to +10 dBm, +8 dBm (typ.)
impedance 50 Ω (nom.)
connector BNC female
External reference
frequency 10 MHz ± 5 ppm
input level 0 dBm to +10 dBm
impedance 50 Ω (nom.)
connector BNC female
External Trigger Input
External trigger input
impedance 1 kΩ (nom.)
connector BNC female
Communication Interface
USB host
connector A plug
protocol version2.0
USB device
connector B plug
protocol version2.0
LAN LXI core 2011 device 10/100Base, RJ-45
IEC/IEEE (GPIB) bus (USB-GPIB option) IEEE488.2