User manual

Chapter 2 Command System RIGOL
DSA700 Programming Guide 2-183
:TRACe:MATH:PEAK:POINts?
Syntax
:TRACe:MATH:PEAK:POINts?
Description
Query the number of peaks in the peak table.
Return Format
The query returns an integer between 0 and 10.
:TRACe:MATH:PEAK:SORT
Syntax
:TRACe:MATH:PEAK:SORT AMPLitude|FREQuency
:TRACe:MATH:PEAK:SORT?
Description
Set the sorting rule of the peak table.
Query the sorting rule of the peak table.
Parameter
Name
Type
Range
Default
--
Keyword
AMPLitude|FREQuency
FREQuency
Return Format
The query returns AMPL or FREQ.
Example
The command below sets the sorting rule of the peak table to amplitude.
:TRACe:MATH:PEAK:SORT AMPLitude
The query below returns AMPL.
:TRACe:MATH:PEAK:SORT?
:TRACe:MATH:PEAK:TABLe:STATe
Syntax
:TRACe:MATH:PEAK:TABLe:STATe OFF|ON|0|1
:TRACe:MATH:PEAK:TABLe:STATe?
Description
Enable or disable the peak table.
Query the status of the peak table.
Parameter
Name Type Range Default
-- Bool OFF|ON|0|1 OFF|0
Return Format
The query returns 0 or 1.