User manual

RIGOL Chapter 2 Command System
2-142 DSA700 Programming Guide
[:SENSe]:SIGCapture:2FSK:SIGNal
Syntax
[:SENSe]:SIGCapture:2FSK:SIGNal 0|1|2
[:SENSe]:SIGCapture:2FSK:SIGNal?
Description
Select the desired 2FSK signal for editing its amplitude limits of pass/fail test.
Query the 2FSK signal selected currently.
Parameter
Name
Type
Range
Default
——
Discrete 0|1|2 0
Explanation
0: Modify the first 2FSK signal (Peak 1 and Peak 2).
1: Modify the second 2FSK signal (Peak 3 and Peak 4).
2: Modify the third 2FSK signal (Peak 5 and Peak 6).
This command is valid only when 2FSK is turned on.
Return Format
The query returns 0 or 1.
Example
The command below selects the first 2FSK signal.
:SENSe:SIGCapture:2FSK:SIGNal 0
The query below returns 0.
:SENSe:SIGCapture:2FSK:SIGNal?
[:SENSe]:SIGCapture:2FSK:AMPUp
Syntax
[:SENSe]:SIGCapture:2FSK:AMPUp <ample>
[:SENSe]:SIGCapture:2FSK:AMPUp?
Description
Set the amplitude upper limit of the specified 2FSK signal.
Query the amplitude upper limit of the specified 2FSK signal.
Parameter
Name
Type
Range
Default
<ample> Consecutive Real Number The amplitude lower limit to 320 dBm -10 dBm
Explanation
This command is valid only when 2FSK is turned on.
Return Format
The query returns the amplitude upper limit in scientific notation.
Example
The command below sets the amplitude upper limit to -20 dBm.
:SENSe:SIGCapture:2FSK:AMPUp -20
The query below returns -2.000000E+01.
:SENSe:SIGCapture:2FSK:AMPUp?