User manual

Chapter 2 Command System RIGOL
DSA700 Programming Guide 2-81
:MMEMory:STORe:CORRection
Syntax
:MMEMory:STORe:CORRection ANTenna|CABLe|OTHer|USER,<file_name>
Description
Save the amplitude correction data file with the specified filename (.cbl or .csv).
Parameter
Name
Type
Range
Default
-- Keyword ANTenna|CABLe|OTHer|USER --
<file_name> ASCII String -- --
Explanation
<file_name> should contain the path and the filename.
You can save the amplitude correction file in the D disk or E disk. The .csv format file can only be stored in
the E disk.
If the specified file already exists, it will be overwritten.
Example
The command below store the amplitude correction file to the D disk with the filename ANT.cbl.
:MMEMory:STORe:CORRection ANT,D:\Corr1:ANT.cbl
:MMEMory:STORe:LIMit
Syntax
:MMEMory:STORe:LIMit <file_name>
Description
Save the limit line currently edited with the specified filename (.lim).
Parameter
Name
Type
Range
Default
<file_name> ASCII String -- --
Explanation
<file_name> should contain the path and the filename.
You can save the limit file in the D disk or E disk.
If the specified file already exists, it will be overwritten.
Example
The command below stores the limit line currently edited in the D disk with the filename low.liml.
:MMEMory:STORe:LIMit D:\Limit0:low.lim