Instructions

RIGOL Chapter 2 Command System
2-116 MSO7000/DS7000 Programming Guide
:MEASure:CREGion:CBX
Syntax
:MEASure:CREGion:CBX <cbx>
:MEASure:CREGion:CBX?
Description
Sets or queries the position of Cursor B when the measurement range is the "cursor
region".
Parameter
Name
Type
Range
Default
<cbx>
Integer
0 to 1,000
600
Remarks
 The position of the cursor is defined by the pixel coordinate of the screen. The
range of the pixel coordinate on the screen horizontally is from 0 to 1,000 (from
left to right).
 You can run the :MEASure:AREA command to set the measurement range to
"cursor region".
Return
Format
The query returns the position of Cursor B in integer.
Example
:MEASure:CREGion:CBX 100 /*Sets the position of Cursor B to 100.*/
:MEASure:CREGion:CBX? /*The query returns 100.*/
:MEASure:CATegory
Syntax
:MEASure:CATegory <val>
:MEASure:CATegory?
Description
Sets or queries the measurement type.
Parameter
Name
Type
Range
Default
<val>
Integer
0 to 2
0
Remarks
0: horizontal; 1: vertical; 2: other
Return
Format
The query returns an integer ranging from 0 to 2.
Example
:MEASure:CATegory 1 /*Sets the vertical measurement.*/
:MEASure:CATegory? /*The query returns 1.*/