Instructions

Chapter 1 Quick Start RIGOL

MSO7000/DS7000 User's Guide 1-13

3. USB DEVICE Interface

You can connect the instrument to the PC via this interface. Then you can

use the PC software Ultra Scope to send the SCPI commands or use the

user-defined programming to control the instrument.

4. USB HOST Interface

You can connect the storage device that is compatible with the USB to the

instrument via the USB HOST interface.

Connecting the storage device can save or recall the waveform files and

setup files; as well as save the data and screen image. When update is

available, you can perform local upgrading for the system software of the

instrument via the USB HOST interface.

5. HDMI Video Output

You can connect the instrument to an external display equipped with the

HDMI interface (e.g. monitor or projector) via the Video Output interface

to better observe the waveform display clearly. At this time, you can also

view the waveforms on the LCD of the instrument.

Tip

After the oscilloscope is connected to network (if you do not have the access

to the Internet, please ask the administrator to open the specified network

authority), you can perform online upgrading for the system software:

1) Enable the touch screen function. Tap the function navigation icon

at the lower-left corner of the touch screen to enable the function

navigation.

2) Tap the "Help" icon, and then the "Help" menu is displayed on the

screen.

3) Press Online upgrade or enable the touch screen to tap "Online

upgrade", then a "System Update Information" window is displayed,

requesting you whether to accept or cancel "RIGOL TERMS OF ONLINE

UPGRADE SERVICE". Tap "Accept" to start online upgrade. Tap "Cancel"

to cancel the online upgrade.

Tip

Perform local upgrading for the system software:

1) Insert the USB storage device (stored with upgrading files under its root

directory) into the USB HOST interface, and then the "Help" menu is

automatically displayed.

2) Press Local upgrade or enable the touch screen to tap "Local

upgrade", then a dialog box "Upgrade system firmware?" is displayed.

3) Press OK or enable the touch screen to tap "OK" to start local upgrade

for the oscilloscope. If you tap "Cancel", the local upgrade will be

cancelled.