Manualshelf

Instructions

ManualsBrandsRigol ManualsLaboratory EquipmentRigol DS7054 Digital 500 MHz 10 GS/s 500 MP Multimeter functions
311312313314315316317318319320
Chapter 18 Store and Load RIGOL
MSO7000/DS7000 User's Guide 18-11
then "文" is input in the "Name Input Area". If the Chinese character is not
found in the current page, press to go to the next page until you find
the desired character.
4. Input the Other Characters
Refer to Step 3 and use the same method to input the remaining Chinese
characters "件名" in sequence.
5. Modify or Delete the Unwanted Characters that Have Been Entered.
When inputting the filename, you can modify or delete the filename characters
input in the "Name Input Area" as well as delete the pinyin characters input in
the "Pinyin Input Area". To delete the input characters, rotate the multifunction
knob in the virtual keypad to select the delete key . Press down the key
to delete the characters. To modify the input characters, delete the unwanted
characters and input the desired characters again. If the character to be
modified is in the middle, press the delete key to delete the characters
starting from the last one to the character to be modified, then input the new
character again.
If the touch screen is enabled, tap to directly move the cursor to the character
required to be modified or deleted, and then input the desired character again
or delete the character.
6. After finishing the input, rotate the multifunction knob and press OK. The
oscilloscope will create a folder or a specified type of file with this name under
the current directory.
To Delete a File or Folder
1. Delete a File or Folder from the Internal Memory
1) Press Storage Disk and rotate the multifunction knob to select the
internal memory "Local Disk(C)". Press down the knob to open it.
2) Rotate the multifunction knob to select the file or the folder to be
deleted.
3) Press Delete, and then a confirmation dialog box is displayed. Tap to select
"Yes" to delete the file or the folder.
Tip
If characters already exist in the Pinyin input area, when you rotate the
multifunction knob to delete the characters in the name input area, the
characters in the Pinyin input area will be deleted first.