Instructions

Installation Guide RIGOL

RIGOL MSO7000/DS7000 Rack Mount Kit

This rack mount kit is designed to mount RIGOL MSO7000/DS7000 Series Digital

Oscilloscope into a standard 19-inch cabinet that conforms to the Electronic Industries

Association (EIA) standard.

Kit Part Checklist

No.

Name

Qty.

Description

Rear Bracket

——

M4 Screw

M4 × 6 Phillips Pan Head Screw

Left Plate

——

Retaining Bracket

——

Top Plate

——

Right Plate

——

Bottom Plate

——

M6 Screw

M6 × 16 Phillips Pan Head Screw

M6 Nut

M6 Square Lock Cage Nut

2 8 9

PAGE 1
Installation Guide RIGOL RIGOL MSO7000/DS7000 Rack Mount Kit This rack mount kit is designed to mount RIGOL MSO7000/DS7000 Series Digital Oscilloscope into a standard 19-inch cabinet that conforms to the Electronic Industries Association (EIA) standard. Kit Part Checklist No. Name Qty.
PAGE 2
Installation Guide RIGOL Installation Tool The PH2 Phillips screwdriver is recommended. Space Requirements To mount the instrument into the cabinet correctly, please ensure that the following requirements are met.  The cabinet must be a standard 19-inch one.  The available height of the cabinet should be at least 6U (266.7 mm).  The depth of the cabinet should be at least 200 mm. The dimensions of the rack-mounted instrument are as shown below. 477.9 266.7 169.
PAGE 3
Installation Guide 1. RIGOL Mount the left and right plates Fasten the left and right plates to the bottom plate using four M4 screws. 2. Mount the top plate Fasten the top plate to the assembled rack using four M4 screws. 3. Place and fasten the instrument Place the instrument into the confined position on the bottom plate. Fasten the instrument to the rack using two rear brackets, two retaining brackets and eight M4 screws.
PAGE 4
Installation Guide 4. RIGOL Get encased in the cabinet Mount the assembled instrument and rack into a standard 19-inch cabinet using six M6 screws and six M6 nuts.