User manual

RIGOL
MSO7000/DS7000 Quick Guide 17
English
To Use the Built-in Help System
The help system of this oscilloscope provides instructions for all the function
keys on the front panel and their corresponding menu keys. The steps for
opening the built-in help system are as follows:
1. Using the touch screen function, tap the function navigation icon at
the lower-left corner of the touch screen to enable the function
navigation.
2. Tap the "Help" icon, and then the "Help" menu is displayed on the screen.
3. Press Help on the front panel or touch the "Help" icon, and then the help
information is displayed on the screen, as shown in Figure 16. The help
interface mainly consists of two sections. The left section lists "Help
Options", and the right section is the "Help Display Area".
Figure 16 Help Information
After opening the help interface, you can get its help information in the "Help
Display Area" through the following three methods:
Method 1:
For the keys, you can directly press the front-panel keys (except the Power key
, the Menu Off key and Back key) to obtain the help information. For the
buttons, you can rotate the knob or press down the knob to get the help
information (except the multifunction knob ). As the function of rotating the
knob is different from that of pressing down the knob, these two operations will
Help Options Help Display Area