User Manual

RIGOL 12 Store and Recall
DS4000 User’s Guide
12-8
4) After the storage position is selected, press New File to turn on the
interface as shown in Figure g. Refer to the descriptions in “To Create a
New File or Folder” to create a new file name.
Figure g
5) Press OK to execute the saving operation.
2. Load the specified type of file in the external USB storage device.
1) Press Storage  Storage to select “Traces” and then press Load to turn
on the interface as shown in Figure h. Use to select “Disk E” and press
down to open the USB storage device (Figure i).
Figure h
2) As shown in Figure i, use to select the desired file to load and then press
Load to load the selected file.