User manual

RIGOL Chapter 2 Command System
2-78 DS4000E Programming Guide
:CURSor:TRACk:CBX
Syntax
:CURSor:TRACk:CBX <bx>
:CURSor:TRACk:CBX?
Description
Sets or queries the horizontal position of Cursor B (X cursor) in the track mode of cursor measurement.
Parameter
Name
Type
Range
Default
<bx>
Integer
0 to 699
550
Remarks
 The horizontal position of the cursor is defined by the pixel coordinate of the screen. The range of the
pixel coordinate on the screen horizontally is from 0 to 699 (from left to right).
 When X is selected as the track axis (refer to the :CURSor:TRACk:AXIS command),
the :CURSor:TRACk:CBY <by> command is invalid.
Return Format
The query returns an integer between 0 and 699.
:CURSor:TRACk:CBY
Syntax
:CURSor:TRACk:CBY <by>
:CURSor:TRACk:CBY?
Description
Sets or queries the vertical position of Cursor B (Y cursor) in the track mode of cursor measurement.
Parameter
Name
Type
Range
Default
<ay>
Integer
0 to 399
300
Remarks
 The vertical position of the cursor is defined by the pixel coordinate of the screen. The range of the
pixel coordinate on the screen vertically is from 0 to 399 (from top to bottom).
 When Y is selected as the track axis (refer to the :CURSor:TRACk:AXIS command),
the :CURSor:TRACk:CBY <by> command is invalid.
Return Format
The query returns an integer between 0 and 399.
:CURSor:TRACk:IXDelta?
Syntax
:CURSor:TRACk:IXDelta?
Description
Queries the reciprocal (1/△X) of the difference between the X value at Cursor A (X cursor) and the X value
at Cursor B (X cursor) in the track mode of cursor measurement. The default unit is Hz.