User manual

Chapter 3 Programming Examples RIGOL
DS4000E Programming Guide 3-7
LabVIEW Programming Example
Program used in this example: LabVIEW 8.2
Function realized in this instance: reading the waveform data of CH1 on the screen.
1. Run LabVIEW 8.2, and then create a VI file named Demo_LabVIEW.
2. Add the VISA resource name and Waveform Graph controls, as shown in the figure below:.
3. Open the Block Diagram interface. Right-click on the VISA resource name and you can select and
add the following functions from VISA Palette in the pop-up menu: VISA Write, VISA Read, VISA
Open and VISA Close.