User manual

RIGOL Chapter 2 Command System
2-198 DS4000E Programming Guide
:TRIGger:CAN:FTYPe
Syntax
:TRIGger:CAN:FTYPe <ftype>
:TRIGger:CAN:FTYPe?
Description
Sets or queries the frame type of CAN trigger when the trigger condition is "FTYPe" (refer to
the :TRIGger:CAN:WHEN command).
Parameter
Name
Type
Range
Default
<ftype> Discrete {DATA|REMote|ERRor|OVERload} DATA
Remarks
 DATA: indicates data frame.
 REMote: indicates remote frame.
 ERRor: indicates error frame.
 OVERload: indicates overload frame.
Return Format
The query returns DATA, REM, ERR, or OVER.
:TRIGger:CAN:LEVel
Syntax
:TRIGger:CAN:LEVel <level>
:TRIGger:CAN:LEVel?
Description
Sets or queries the trigger level of CAN trigger. The unit is the same as the current amplitude unit of the
source channel.
Parameter
Name
Type
Range
Default
<level> Real
The range of <level> is from (-6 x VerticalScale - Offset)
to (6 x VerticalScale - Offset) (relative to the vertical
center of the screen).
Wherein, VerticalScale is the vertical scale of the source
channel, refer to the :CHANnel<n>:SCALe command;
Offset is the vertical position of the source channel, refer
to the :CHANnel<n>:OFFSet command.
0
Return Format
The query returns the trigger level in scientific notation.
:TRIGger:CAN:SOURce
Syntax
:TRIGger:CAN:SOURce <source>
:TRIGger:CAN:SOURce?