User manual

RIGOL Chapter 2 Command System
2-8 DS4000E Programming Guide
:BUS<n>:DISPlay
Syntax
:BUS<n>:DISPlay <bool>
:BUS<n>:DISPlay?
Description
Enables or disables the display of the specified decoding bus; or queries the on/off display status of the
specified decoding bus.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<bool> Bool {{1|ON}|{0|OFF}} 0|OFF
Return Format
The query returns 1 or 0.
:BUS<n>:EEXPort
Syntax
:BUS<n>:EEXPort
Description
Exports the decoding information in the specified decoding bus event table to the external USB storage
device (if detected) in CSV form.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
:BUS<n>:EVENt
Syntax
:BUS<n>:EVENt <bool>
:BUS<n>:EVENt?
Description
Enables or disables the event table of the specified decoding bus; or queries the on/off status of the
specified decoding bus event table.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<bool> Bool {{1|ON}|{0|OFF}} 0|OFF
Remarks
Before using the command, enable the display of the specified decoding bus (refer to the :BUS<n>:DISPlay
command).
Return Format
The query returns 1 or 0.