Datasheet

Calculated Rise Time
[1]
DS4024E: 1.8 ns
DS4014E: 3.5 ns
DC Gain Accuracy ±2% full scale
DC Offset Accuracy
200 mV/div to 5 V/div: ±0.1 div ± 2 mV ± 0.5% offset
1 mV/div to 195 mV/div: ±0.1 div ± 2 mV ± 1.5% offset
ESD Tolerance ±2 kV
Channel-to-Channel Isolation DC to maximum bandwidth: >40 dB
Trigger
Trigger Level Range
Internal: ±6 div from the center of the screen
EXT: ±0.8 V
Trigger Mode Auto, Normal, Single
Holdoff Range 100 ns to 10 s
High Frequency Rejection
[1]
50 kHz
Low Frequency Rejection
[1]
5 kHz
Edge Trigger
Edge Type Rising, Falling, Rising&Falling
Pulse Trigger
Pulse Condition
Positive Pulse Width (greater than, lower than, within the specic interval);
Negative Pulse Width (greater than, lower than, within the specic interval)
Pulse Width Range 4 ns to 4 s
Runt Trigger
Pulse Polarity Positive, Negative
Qualier None, >, <, <>
Pulse Width Range 4 ns to 4 s
Nth Edge Trigger
Edge Type Rising, Falling
Idle Time 40 ns to 1 s
Number of Edges 1 to 65535
Slope Trigger
Slope Condition
Positive Slope (greater than, lower than, within the specic interval);
Negative Slope (greater than, lower than, within the specic interval)
Time Setting 10 ns to 1 s
Video Trigger
Polarity Positive, Negative
Synchrony All Lines, Line Num, Odd Field, Even Field
Standard NTSC, PAL/ECAM, 480P, 576P, 720P, 1080P, and 1080I
Pattern Trigger
Pattern Setting H, L, X, Rising Edge, Falling Edge
RS232/UART Trigger
Polarity Normal, Invert
Trigger Condition Start, Error, Check Error, Data
Baud Rate
2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, 230400 bps,
460800 bps, 921600 bps, 1Mbps, User
Data Bits 5 bit, 6 bit, 7 bit, 8 bit
I2C Trigger
Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D
Address Bits 7 bits, 8 bits, 10 bits
Address Range 0 to 127, o to 255, 0 to 1023
Byte Length 1 to 5
SPI Trigger
Trigger Condition CS, Timeout
5
RIGOL