User manual

Chapter 1 Disassemble and Assemble RIGOL

MSO4000/DS4000 Service Guide 1-9

To Disassemble the Front Panel and Knobs

Figure 1-6 To Disassemble the Front Panel and Knobs

Part Explanations:

① 14 knobs (include a navigation knob).

② 6 screws (torx pan head screw assembly #FW3*8) fixing the front panel (the

positions of some of the screws are not marked out in the figure above and please

disassemble them according to their actual positions).

③ 3 screws (torx countersunk head screw #FM3*6) fixing the front panel.

Disassemble Steps:

1. Remove the 14 knobs.

2. Remove the 6 screws (②) fixing the front panel using the screwdriver (T10).

3. Remove the 3 screws (③) fixing the front panel using the screwdriver (T10) after

removing the key film.

4. Remove the front panel gently.

②

①

×14

③

Nevigation Knob