User manual

Chapter 2 Command System RIGOL
DS4000E Programming Guide 2-73
Parameter
Name
Type
Range
Default
<unit>
Discrete
{SECond|HZ|DEGRee|PERCent}
SECond
Remarks
 SECond: when the X value at Cursor A (X cursor), the X value at Cursor B (X cursor), and the difference
between the two values (namely A->X, B->X, and △X in the measurement results) are queried, the
returned values are expressed in s. When the reciprocal of the difference between the two values
(namely 1/△X in the measurement results) are queried, the returned value is expressed in Hz.
 HZ: when the X value at Cursor A (X cursor), the X value at Cursor B (X cursor), and the difference
between the two values (namely A->X, B->X, and △X in the measurement results) are queried, the
returned values are expressed in Hz. When the reciprocal of the difference between the two values
(namely 1/△X in the measurement results) are queried, the returned value is expressed in s.
 DEGRee: when the X value at Cursor A (X cursor), the X value at Cursor B (X cursor), and the
difference between the two values (namely A->X, B->X, and △X in the measurement results) are
queried, the returned values are expressed in degree.
 PERCent: when the X value at Cursor A (X cursor), the X value at Cursor B (X cursor), and the
difference between the two values (namely A->X, B->X, and △X in the measurement results) are
queried, the returned values are expressed in percentage.
Return Format
The query returns SEC, HZ, DEGR, or PERC.
:CURSor:MANual:TYPE
Syntax
:CURSor:MANual:TYPE <type>
:CURSor:MANual:TYPE?
Description
Sets or queries the cursor type in the manual mode of cursor measurement.
Parameter
Name
Type
Range
Default
<type>
Discrete
{TIME|AMPLitude}
TIME
Remarks
 TIME: represents X cursor.
 AMPLitude: represents Y cursor.
Return Format
The query returns TIME or AMPL.
:CURSor:MANual:VUNit
Syntax
:CURSor:MANual:VUNit <unit>
:CURSor:MANual:VUNit?
Description
Sets or queries the vertical unit in the manual mode of cursor measurement.