Manualshelf

User manual

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentDigital 100 MHz 2 null 14 null 8 Bit Digital storage (DSO)
61626364656667686970
Chapter 2 Command System RIGOL
DS4000E Programming Guide 2-55
:CALCulate:MULTiply:VOFFset
Syntax
:CALCulate:MULTiply:VOFFset <offs>
:CALCulate:MULTiply:VOFFset?
Description
Sets or queries the vertical position of the multiplication operation waveform. The unit is related to the
current amplitude unit of the source channel.
Parameter
Name
Type
Range
Default
<offs> Real
(-40 x vertical scale of the multiplication operation waveform) to
(40 x vertical scale of the multiplication operation waveform)
0
Return Format
The query returns the vertical position in scientific notation.
:CALCulate:MULTiply:VSCale
Syntax
:CALCulate:MULTiply:VSCale <scale>
:CALCulate:MULTiply:VSCale?
Description
Sets or queries the vertical scale of the multiplication operation waveform. The unit is related to the current
amplitude unit of the source channel.
Parameter
Name
Type Range Default
<scale> Real Refer to Remarks 2 U/div
Remarks
The default range of <scale> is from 20 nU/div to 10 MU/div. Its actual range is related to the vertical scale
of the source channel (refer to the :CHANnel<n>:SCALe command), at 1-2-5 step.
Note: After the vertical scale of the source channel is modified, the range of <scale> will not be changed
until the multiplication operation is re-enabled.
Return Format
The query returns the vertical scale in scientific notation.